Working in a Dental Practice · Updated 18 November 2026

Infection control is the one part of dental assisting where “near enough” is never good enough. Every patient is treated as potentially infectious, every instrument has a documented journey from dirty to sterile, and the assistant is usually the person who makes sure it happens. This guide covers the essentials.

The rules you work under

Dental practices in Australia follow the Dental Board of Australia's guidelines on infection control. These point to the Australian Guidelines for the Prevention and Control of Infection in Healthcare (NHMRC), the ADA Guidelines for Infection Control and the Australian Standard for reprocessing reusable medical devices, AS 5369. Your practice's written infection control manual should be based on these, so read it in your first week.

Standard precautions

Standard precautions are applied to every patient, regardless of what you know about their health:

  • Hand hygiene at the right moments: before touching a patient, before a procedure, after exposure to body fluids, after touching a patient, and after touching their surroundings.
  • Personal protective equipment: gloves, mask, protective eyewear and a gown or other protective clothing, chosen for the procedure.
  • Respiratory hygiene and cough etiquette, for patients and staff.
  • Safe handling of sharps, using single-handed recapping devices or safety systems and disposing of sharps at the point of use.
  • Environmental cleaning of clinical contact surfaces between patients.
  • Reprocessing reusable instruments and using single-use items only once.
  • Waste management, separating clinical, sharps, amalgam and general waste correctly.

Transmission-based precautions

When a patient is known or suspected to have an infection spread by contact, droplets or air, extra measures apply. These include scheduling at the end of the day, using a particle-filter respirator, reducing aerosol-generating procedures, and in some cases deferring non-urgent treatment.

Zoning the surgery

Good practices divide the surgery into a contaminated zone, the area around the patient's mouth and anything touched during treatment, and a clean zone for sterile stock, records and computers. Assistants plan their set-up so contaminated gloves never touch the clean zone. Barrier wraps on light handles, controls and keyboards reduce the cleaning needed between patients.

Dental unit waterlines

The narrow tubing that supplies handpieces and air-water syringes can develop biofilm. Practices manage this with daily flushing, chemical treatment following the manufacturer's instructions, and periodic water quality testing. Assistants usually run the start-of-day and between-patient flushes and keep the records.

Sharps injuries and exposures

If you suffer a needlestick or splash:

  1. Wash the area with soap and water, or rinse eyes and mouth with water.
  2. Report it immediately to the dentist or practice manager.
  3. Follow the practice's exposure protocol, which usually involves a prompt medical assessment and testing.
  4. Document the incident.

Hepatitis B vaccination and confirmed immunity are why practices ask about your vaccination status before you start.

A between-patient checklist

StepAction
1Remove gloves and perform hand hygiene once treatment ends
2Put on heavy-duty utility gloves and transport instruments to the reprocessing area in a closed container
3Dispose of sharps and single-use items correctly
4Remove barriers, then clean and disinfect clinical contact surfaces
5Flush waterlines as per protocol
6Perform hand hygiene and apply fresh barriers
7Set up sterile instruments for the next patient, opening packs in front of them where possible

Training

Infection prevention is built into the Certificate III, and we also run a stand-alone infection control course for dental staff who need a refresher or a nationally recognised unit. For the reprocessing side, read our instrument sterilisation guide.

Frequently asked questions

Which infection control guidelines do Australian dental practices follow?

The Dental Board of Australia's infection control guidelines, which reference the NHMRC Australian Guidelines for the Prevention and Control of Infection in Healthcare, the ADA Guidelines for Infection Control and AS 5369 for reprocessing.

How often should dental staff do infection control training?

Practices are expected to keep staff training current. Many run in-house refreshers every year and send staff on formal courses when guidelines change or new staff join.

Talk to our training team

Intakes, fees and funding change from year to year. Call 1300 855 503 or use the contact page and we will tell you what is open at Belmont, Bunbury or Mandurah right now.